Crafter Mercedes Sprinter

Rear view camera 3rd brake light 15m cable for VW Crafter and Mercedes Sprinter

Rear view camera 3rd brake light 15m cable for VW Crafter and Mercedes Sprinter
Rear view camera 3rd brake light 15m cable for VW Crafter and Mercedes Sprinter
Rear view camera 3rd brake light 15m cable for VW Crafter and Mercedes Sprinter
Rear view camera 3rd brake light 15m cable for VW Crafter and Mercedes Sprinter
Rear view camera 3rd brake light 15m cable for VW Crafter and Mercedes Sprinter
Rear view camera 3rd brake light 15m cable for VW Crafter and Mercedes Sprinter
Rear view camera 3rd brake light 15m cable for VW Crafter and Mercedes Sprinter

Rear view camera 3rd brake light 15m cable for VW Crafter and Mercedes Sprinter    Rear view camera 3rd brake light 15m cable for VW Crafter and Mercedes Sprinter

Video & TV in Car. Rear view camera 3rd brake light 15m cable for VW Crafter and Mercedes Sprinter. Caution: many vehicles now use pulse width modulation to warn the driver when a rear light has failed. This affects the power source of the reversing light, which can result in a poor signal for the retrofit camera. Our signal filter stabilises this signal and ensures that the camera provides a reliable flicker-free image.

TOP FEATURES AT A GLANCE. Rear view camera in 3rd brake light incl.

15m cable for VW Crafter and Mercedes Sprinter. Our brake light cameras are vehicle-specific tailor-made solutions for the integration of a rear view camera. Due to its precise fit, it is securely and permanently installed there.

Due to the positioning instead of the brake light, the camera is far up and looks down at an angle. This allows you to see the entire relevant rear area of the vehicle when parking, turning or manoeuvring. With the achieved protection class IP68 the camera is prepared for all environmental influences, i.

Protected against dust and water. Even temperatures from -30 to +70°C cannot damage the camera. Look & Feel like original ex works.

The high-quality workmanship and materials ensure a long service life and reliable operation at all times. The installation is simple, fast and without drilling.

The curvature of the roof edge above the rear doors makes installation more difficult and thus severely restricts the rear visibility area. The integration into the brake light glass and the distance gained as a result allow a much better view of elements behind the vehicle. Image reproduction of the rear view camera. The video signal is transmitted via the supplied video connection cable and automatically displayed in the navigation system on a monitor, a retrofit navigation system e.

From Pioneer, Sony, Alpine, Kenwood, etc. Or via the rear view camera interface. Directly on the factory navigation system when reverse gear is engaged.

Sharp image through 700 TV lines. The number of TV lines determines the sharpness of the image and thus the resolution. The higher the resolution, the clearer and more detailed the camera image is displayed on the monitor. Protection against moisture and dirt. With protection class IP68 the camera is well protected against environmental influences such as moisture and dust.

The first digit shows the protection against foreign objects / contact, while the second digit refers to the water resistance. Playback on factory navigation via rear view camera interface (optional) If you want to display the picture of the rear view camera comfortably on your existing monitor of your factory navigation system, you additionally need a rear view camera interface. Rear view Depending on the roof structure and the trailer hitch installed on the vehicle, the trailer hitch cannot be seen on the monitor. Avoid image interference with our signal filter (optional) Recent vehicles use a pulsed voltage for the power supply of the exterior vehicle lighting rear light, brake light etc. , which is unsuitable for image sensors / video electronics and results in malfunctions or image disturbances.

Therefore, please do not connect the connection cable for activating the rear view camera directly to the reversing light but use our signal filter. A suitable signal filter can be found under Accessories. Dimensions: 341 x 34 mm - Hole spacing of the screw connections: 307 mm.

Picture sensor: Color sensor, 1/3 CCD Sony. Light sensitivity: 0 Lux (with IR ON). Cam resolution: 648 x 488 px. Color resolution: 700 TV lines.

Operating temperature: -30°C - 70°C. Power connection & video cables (15 m). Mercedes-Benz Sprinter (W906, W907, W910). With factory-installed third brake light. The article is compatible with the vehicle configurations listed below.

Alle anderen Werksradios oder Navis mit CD-Wechslersteuerung. Alle anderen Werksradios oder Navis ohne CD-Wechslersteuerung. W907 / W910 (ab 2018). RCD 3002 (Audio 20 NTG 2.5). RCD 4001 (Audio 20 NTG 2).

RNS 4001 (APS 50 NTG 2). RNS 5001 (Comand APS NTG 2). RNS 6000 (Audio 15+Becker MAP PILOT). Some of our customers reviews.
Rear view camera 3rd brake light 15m cable for VW Crafter and Mercedes Sprinter    Rear view camera 3rd brake light 15m cable for VW Crafter and Mercedes Sprinter